Mikrotik
Βλέπετε 13–24 από 173 αποτελέσματα
-
MikroTik wsAP ac lite, RBwsAP-5Hac2nD
€70.00MikroTik RBwsAP-5Hac2nD, wsAP ac lite, 1.5dBi, 22dBm, 2×2 @2.4GHz, 3dBi, 23dBm, 1×1 @ 5GHz, 650MHz, 64MB, 3xEthernet, PoE-in 802.3af/at, PoE-out, USB, L4
-
-
MikroTik Gigabit Ethernet Surge Protector IP67 (GESP)
€35.24GESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lightning or surge damages.
Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protectors on each end. They come sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm.
Don’t forget about the grounding wire! Secure it to the rackmount, mast, or any other structure that is connected to the ground. For maximum protection, you should use a surge protector on both ends of long cables.
-
MikroTik TG-BT5-OUT, Outdoor Bluetooth tag for MikroTik KNOT or other IoT asset-tracking/telemetry setups
€19.05TG-BT5-OUT
Outdoor Bluetooth tag for the MikroTik KNOT or other IoT asset-tracking/telemetry setups.
TG-BT5-OUT: the heavy-duty tag for industrial challengesThis version of our BLE tags comes completely sealed, cast in industrialgrade molds to give it a solid IP69k ingress protection rating. In other words, this tag is dust-tight – nothing gets in, and it is fully protected against close-range high-pressure, high-temperature spray downs. Perfect for industrial telemetry systems or to track all kinds of heavy equipment and materials at a construction site.
Like the indoor version, this tag also supports iBeacon, Eddystone, and MikroTik telemetry formats. There is an NFC encoded MAC address and optional encryption. Unlike the indoor version, the outdoor tag comes with a built-in temperature sensor that can be used for condition monitoring. The ±0.5°C precision can be very useful in cold supply chain logistics. TG-BT5-OUT features an improved 550 mAH battery that will last around five years (with a sending interval of 1s). It is suitable for strapping to all kinds of surfaces, and it can handle a temperature range of -20°C to 85°C. -
MikroTik TG-BT5-IN, Indoor Bluetooth tag for MikroTik KNOT or other IoT asset-tracking/telemetry setups
€11.00TG-BT5-IN
Indoor Bluetooth tag for the MikroTik KNOT or other IoT asset-tracking/telemetry setups.
Indoor version, this tag also supports iBeacon, Eddystone, and MikroTik telemetry formats. There is an NFC encoded MAC address and optional encryption. Unlike the indoor version, the outdoor tag comes with a built-in temperature sensor that can be used for condition monitoring. The ±0.5°C precision can be very useful in cold supply chain logistics. TG-BT5-OUT features an improved 550 mAH battery that will last around five years (with a sending interval of 1s). It is suitable for strapping to all kinds of surfaces, and it can handle a temperature range of -20°C to 85°C.
-
MikroTik GESP+POE-IN – Passive Gigabit PoE injector with surge protection
€16.50GESP+POE-IN is a passive Gigabit PoE injector with integrated Ethernet surge protection with one Ethernet port and on the other side is cable with RJ45 connector and ground cable terminated with a loop. This version is intended for indoor use on a port, on a switch or router that leads to an outdoor CPE unit.
The package also includes a wall plug with a screw and a special metal plate for attachment to a wall or rack.
-
OPTIC S+85DLC03D SFP+ module 10G LC MM
€24.50OPTIC SFP+ S 85DLC03D is a 10G SFP+ transceiver with a LC connector, supporting DDM, 850nm, for up to 300 meter Multi Mode fiber connections Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.