MikroTik CCR1009-7G-1C-1S+PC, 9x1GHz, 2GB, 7xGigabit, 1xCombo Port, 1xSFP+, LCD, SmartCard slot, microUSB, L6

573.50

The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.

Διαθέσιμο κατόπιν παραγγελίας

Compare
Κωδικός προϊόντος: CCR1009-7G-1C-1S+PC Κατηγορίες: , , Ετικέτες: ,

Περιγραφή

The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.

Important changes

No switch-chip – the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

Combo-port – a single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.

100Mbps SFP support – this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

More throughput – because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.

This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.

Unit also includes a LCD touchscreen, smart card slot, microSD and a SFP+ port for 10G connections.

 

Specifications

Details
Product code CCR1009-7G-1C-1S+PC
Architecture TILE
CPU TLR4-00980CH-10CE-A3b
CPU core count 9
CPU nominal frequency 1 GHz
Dimensions 272x190x47mm
License level 6
Operating System RouterOS
Size of RAM 2 GB
Storage size 128 MB
Storage type NAND
Tested ambient temperature -20C .. +60C

Powering

Details
Max Power consumption 33W
PoE in Passive PoE
PoE in input Voltage 18-57 V
Number of DC inputs 2 (PoE-IN, DC jack)
DC jack input Voltage 18-57 V

Ethernet

Details
10/100/1000 Ethernet ports 7
Ethernet Combo ports 1

Fiber

Details
SFP+ ports 1

Peripherals

Details
Number of SIM slots 1 Smart card (Mini SIM)
Number of USB ports 1
Serial port RS232
USB Power Reset Yes
USB slot type microUSB type AB

Other

Details
CPU temperature monitor Yes
Current Monitor Yes
PCB temperature monitor Yes
Voltage Monitor Yes

Ethernet test results

CCR1009-7G-1C-1S+PC Tile 9 core all port test 1GHz with combo-port and SFP+
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 1,300.4 15,792.1 3,759.4 15,398.5 14,874.0 7,615.5
Bridging 25 bridge filter rules 1,100.4 13,363.3 1,183.8 4,848.8 1,184.0 606.2
Routing none (fast path) 1,300.4 15,792.1 3,759.4 15,398.5 14,581.0 7,465.5
Routing 25 simple queues 1,300.4 15,792.1 1,686.0 7,175.6 1,699.6 1,142.1
Routing 25 ip filter rules 615.8 7,478.3 660.9 2,812.8 668.3 449.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

IPsec test results

CCR1009-7G-1C-1S+PC CCR1009 series 1 GHz IPsec throughput
Mode Configuration 1400 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Single tunnel AES-128-CBC + SHA1 112.5 1260.0 112.6 461.2 115.4 59.1
256 tunnels AES-128-CBC + SHA1 232.1 2599.5 268.2 1098.5 277.3 142.0
256 tunnels AES-128-CBC + SHA256 232.1 2599.5 268.2 1098.5 277.3 142.0
256 tunnels AES-256-CBC + SHA1 230.0 2576.0 265.4 1087.1 260.7 133.5
256 tunnels AES-256-CBC + SHA256 230.0 2576.0 265.4 1087.1 260.7 133.5
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Επιπλέον πληροφορίες

Βάρος 3 kg

Παρακαλώ να είστε προσεκτικοί ΠΡΙΝ ΑΠΟ ΤΗΝ ΑΓΟΡΑ οποιασδήποτε συσκευής η εξοπλισμού και ειδι΄κά ασύρματης συσκευής/εξοπλισμού και κεραιών.

Ενημερωθείτε για το αν απαιτείται ειδική άδεια λειτουργίας, εγκατάστασης, τοποθέτησης, ρύθμισης και θέσης σε λειτουργία απο την ΕΕΤΤ η άλλο φορέα του Ελληνικού Κράτους η την Ευρωπαική Ενωση.

Παρακαλούμε συμβουλευτείται την ισχύουσα νομοθεσία πριν χρησιμοποιήσετε οποιοδήποτε χαρακτηριστικό υψηλής ισχύος που το προϊόν αυτό θα μπορούσε να έχει η να αποκτήσει μετά απο οποιουδήποτε είδους επέμβαση στο firmware & Operating System της συσκευής η του εξοπλισμού η μετά την τοποθέτηση οποιασδήποτε κεραίας εκπομπής.

Αποσαφήνιση της μέγιστης επιτρεπόμενης E.R.P. που είναι νόμιμη σύμφωνα με την ισχύουσα νομοθεσία και να το προσαρμόσετε (εάν αυτό υπάρχει δυνατότητα) AP σας / CPE / router / Wireless Bridge αναλόγως το ERP της ασύρματης συσκευής σας.

Αν πρόκειται να αγοράσετε η έχετε αγοράσει τη συσκευή σας η τον εξοπλισμό σας, συμφωνείτε να το χρησιμοποιήσετε σύμφωνα με την ισχύουσα νομοθεσία στην Ελλάδα η στην Ε.Ε., δηλαδή στην ΄χώρα που πρόκειται να το χρησιμοποιήσετε..

Αν έχετε αγοράσει τη συσκευή συμφωνείτε ότι δεν θα χρησιμοποιήσετε περισσότερα από 100mW ERP σε 2.4Ghz μπάντα στην Ελλάδα και όχι περισσότερο από 1w ERP στην ζώνη των 5GHz. Σε περίπτωση που η συσκευή μεταδίδει με περισσότερα από 100mW σε 2.4Ghz μπάντα και 1w στην ζώνη των 5GHz, συμφωνείτε να μην το χρησιμοποιήσετε μέσα στην ΕΛΛΆΔΑ ΚΑΙ ΣΤΙΣ ΧΩΡΕΣ ΤΗΣ ΕΕ.

Σε περίπτωση που η συσκευή μπορεί να μεταδώσει σε άλλες συχνότητες από 2,412 – 2,485 5,450 – 5,750 Mhz και Mhz (εξωτερική χρήση) συμφωνείτε να μην το χρησιμοποιήσετε στην ΕΛΛΆΔΑ ΚΑΙ ΣΤΙΣ ΧΩΡΕΣ ΤΗΣ ΕΕ, εκτός αν μπορείτε να πάρετε μια άδεια για να το χρησιμοποιήσετε από την Αρχή Ελέγου Ραδιοσυχνοτήτων (Radio Authority) της χώρα σας (E.E.T.T. για την Ελλάδα).

Η τοποθέτηση οποιασδήποτε κεραίας εκπομπή αλλά και λήψης, μπορεί να απαιτεί ειδική άδεια σύμφωνα με την ισχύουσα νομοθεσία, σας παρακαλώ ενημερωθείτε τόσο για την τοποθέτηση, εγκατάσταση όσο και για την θέση σε λειτουργίας της.

Η τοποθέτηση , εγκατάσταση και λειτουργία αναμετάδοτη σημάτων κινητής τηλεφωνίας, απαιτεί ειδική άδεια σύμφωνα με την ισχύουσα νομοθεσία τόσο απο την εταιρία κινητής τηλεφωνιάς, η τις εταιρίες κινητής τηλεφωνίας, όσο και απο την Ε.Ε.Τ.Τ. Το ίδιο ισχύει και για κεραίες που προορίζονται για την οιοδήποτε εκπομπή σημάτων κινητής τηλεφωνίας.